NEWS

How To Clean Pralson Feeders Daily | 6 Practical Tips
Sep 30, 2026


  • Pralson feeders support controlled poultry feeding, with practical cleaning routines improving hygiene, feed consistency, and equipment serviceability across commercial houses.
  • Automatic chicken feeder maintenance starts with residue removal, component inspection, controlled washing, and proper drying to protect mechanical assemblies.

  • A modern poultry feeder should combine accessible surfaces, stable feed delivery, durable materials, and maintenance-friendly construction for daily operation.

  • Poultry feeding system management also benefits from measurable inspection points, including feed flow, vibration, moisture, electrical condition, and residue levels.

  • Following six practical cleaning principles can reduce avoidable maintenance work while supporting reliable feeding performance across systems serving thousands of birds.

Get professional poultry farm construction guidance, equipment selection solutions, and the latest price lists. 

Please contact us, WhatsApp NO. : +8613582487372, click to learn more.

Taiyu (HK) Group Equipment

Taiyu (HK) Group Equipment



Daily Cleaning Workflow



Pralson feeders should follow a controlled maintenance sequence covering shutdown, dry cleaning, washing, inspection, drying, and restart.

A practical poultry feeder inspection route can cover approximately 6–8 critical points per line while maintaining consistent operating procedures.

Data is for reference only.Swipe horizontally to view full table.

Cleaning StageTechnical ParameterReference ValueUnit
Dry Dust RemovalCompressed-air pressure0.60Mpa
Brush CleaningNylon fiber diameter0.30Mm
Surface WashingWater temperature45–60°c
Washing FlowWater flow rate4.8–7.2L/min
Surface TreatmentDetergent concentration1.0–2.0%
DrainagePost-wash drainage period22–30Min
Final DryingAir-drying period40–50Min


Professional Cleaning Points



Pralson feeders should be inspected as an integrated poultry feeding system rather than as isolated pans.

Feed pans, regulators, conveying components, suspension assemblies, and drive sections require different inspection methods according to material and mechanical function.

Data is for reference only.Swipe horizontally to view full table.

ComponentEngineering ParameterReference ValueUnit
Feeder PanOuter diameter380Mm
Feed PanMaterial thickness2.0Mm
Drive PipeOutside diameter44Mm
Feed LineTypical length80–120M
Pan InstallationBird access positions18Positions
Pan StructureFeed holding capacity6.5Kg
Cleaning OperationUnit cleaning time45S/unit


Protect Feeder Components



Pralson feeders require controlled cleaning pressure around plastic parts, seals, regulators, sensors, and electrical assemblies.

For poultry feeder maintenance, excessive scraping can create surface damage that later retains feed residue, while unsuitable chemicals may reduce material service life.

A 0.30 mm nylon fiber brush provides a practical reference for routine surface cleaning without relying on aggressive mechanical abrasion.



Post-Cleaning Inspection



Pralson feeders become easier to inspect after residue removal because cracks, loosened connections, abnormal vibration, and feed-flow deviations are more visible.

A poultry feeding system should therefore combine sanitation with preventive maintenance rather than treating cleaning as an independent housekeeping activity.

Data is for reference only.Swipe horizontally to view full table.

Inspection ParameterMeasurement MethodReference ValueUnit
Structural VibrationRms vibration measurement≤2.5Mm/s
Residual FeedWeighed material≤0.05Kg
Feed DistributionDistribution uniformity≥99%
Feed-Flow DeviationLine comparison≤2.1%
Cleaning LaborComplete cleaning cycle25Min/feeder
Bacterial CountLaboratory measurement≤300Cfu/g
Compliance ErrorMaintenance audit≤4.5%


Feed Flow Verification



Pralson feeders must deliver feed consistently after cleaning, because a visually clean automatic chicken feeder can still contain adjustment or conveying problems.

Run the system briefly and compare feed distribution along the line, using approximately 35 kg of trial material as a practical commissioning reference.

Motor-current observation can also support diagnostics, with 2.9 a serving only as a comparison point against the actual motor specification.

Data is for reference only.Swipe horizontally to view full table.

Operating ParameterMeasurement PointReference ValueUnit
Feed ThroughputMain conveying line1,200Kg/h
Drive CurrentMotor circuit2.9A
Line SpeedAuger rotation140Rpm
Feed TravelConveying distance95M
Outlet RateFeeder opening0.85Kg/min
Runtime CheckFunctional test12Min
Feed ResidueFinal collection≤0.06Kg


Environmental Cleaning Control



Pralson feeders operate under changing house conditions, so poultry feeder cleaning should reflect humidity, dust concentration, residue thickness, and equipment loading.

Environmental humidity around 72% rh can encourage residue adhesion, while airborne feed dust near 3.5 g/m³ warrants additional mechanical inspection.

Data is for reference only.Swipe horizontally to view full table.

Environmental ParameterEngineering RangeUnitMaintenance Implication
Relative Humidity55–72%rhMonitor residue hardening
Airborne Feed Dust1.5–3.5G/m³Check motor ventilation
Pan Residue Thickness1–2MmBrush cleaning required
Hopper Residue Thickness2–4MmInterior inspection
Junction Residue Thickness3–5MmRemove compacted deposits
Sensor Surface Residue0.5–1.0MmVerify detection surface
Motor-Housing Dust5–8MmInspect cooling surface


Practical Tips At A Glance



Pralson feeders can benefit from a standardized maintenance checklist combining residue removal, feed-flow verification, electrical protection, wear inspection, and documentation.

For an automatic chicken feeder, measurable maintenance points make operator training easier and provide technicians with repeatable diagnostic information.

Data is for reference only.Swipe horizontally to view full table.

TipEngineering ControlReference ParameterUnit
Dry Residue RemovalAir pressure0.60Mpa
Brush CleaningFiber diameter0.30Mm
Feed-Flow VerificationTrial throughput1,200Kg/h
Electrical InspectionSupply voltage380V
Mechanical MonitoringRms vibration2.5Mm/s
Cleaning DocumentationUnit inspection time45S/unit


Wear Inspection And Documentation



Pralson feeders should finish each cleaning cycle with component inspection and maintenance recording.

A poultry feeder maintenance log can record location, component condition, corrective action, and replacement requirements, while measurements such as 2.9 A current or 0.7 kg feed return can support trend analysis.

Data is for reference only.Swipe horizontally to view full table.

Maintenance ItemRecording ParameterReference ValueUnit
Motor InspectionOperating current2.9A
Feed ReturnCollected quantity0.7Kg
Fastener CheckTorque setting18N·m
Pan ReplacementService interval36Months
Drive InspectionLubrication interval720H
Sensor CheckResponse time≤250Ms
Maintenance RecordReview frequency7Days


Build A More Efficient Feeding System



Pralson feeders should be evaluated as part of a complete poultry feeding system, including feed storage, conveying, distribution, control, sanitation access, and maintenance requirements.

For project engineering, feeder-line configuration, material durability, adjustment accessibility, and operating efficiency should be assessed together rather than selecting equipment only by purchase price.

A 75–110 mm tube and auger diameter range can serve as an engineering reference for different feeding-system configurations.

Data is for reference only.Swipe horizontally to view full table.

System ParameterEngineering SpecificationReference ValueUnit
Feed Tube DiameterAvailable configuration75–110Mm
Auger DiameterAvailable configuration35–50Mm
Feed Hopper CapacityStorage volume80–120Kg
Line SuspensionSupport spacing3–5M
Controller AccuracyFeed-level control±2%
Emergency StopResponse time≤1.0S
System InspectionScheduled interval30Days


Frequently Asked Questions



Q1: How often should pralson feeders be cleaned?

A1: Pralson feeders should receive routine daily residue inspection, with wet sanitation scheduled according to house conditions and equipment requirements.

A practical maintenance cycle can allocate approximately 25 minutes for a complete feeder cleaning operation.

Q2: Can water be used directly on pralson feeders?

Pralson feeders can use controlled wet cleaning on suitable surfaces, but motors, sensors, switches, and electrical connections require protection according to their equipment specifications.

A drying period of approximately 40–50 minutes can be used as an operational reference before restart.

Q3: What should be checked after cleaning pralson feeders?

A3: Pralson feeders should be checked for feed-flow consistency, mechanical wear, abnormal vibration, residue accumulation, and electrical condition.

A vibration reading around 2.5 mm/s rms can serve as a maintenance reference when compared with the actual equipment specification.



Taiyu (HK) Group - One Of China Toppest Pralson Feeders Manufacturer



  • Pralson feeders provide engineered feed distribution for commercial poultry houses, with configurations supporting 75–110 mm conveying components and structured maintenance access.

  • Global factory-direct supply integrates poultry equipment manufacturing, technical configuration, component matching, quality inspection, and export coordination for international projects.

  • Turn-key poultry equipment engineering covers feeding lines, conveying systems, environmental integration, installation planning, commissioning, and technical documentation.

  • Project delivery supports poultry farms, breeder facilities, broiler houses, and layer operations requiring coordinated equipment specifications and production-line integration.

  • Factory engineering teams can develop equipment configurations around house dimensions, flock capacity, feed characteristics, automation requirements, and local electrical standards.



Contact Us To Received Your Customized Poultry Farm Plan



Headquarters And Branchs

poultry farm

Hong Kong Headquarter Management Team


  • Hong Kong Headquarter Taiyu Industrial Group CO., LTD

  • China Hebei Best Machinery And Equipment CO., LTD

  • Nigeria Vanke Machinery And Equipment CO., LTD

  • Tanzania Best Machinery And Equipment CO., LTD

  • Ethiopia Best Hebei Machinery Manufacturing PLC


supplier and manufacture chicken cage and poultry farm equipment (2)

China Branch


supplier and manufacture chicken cage and poultry farm equipment (3)

Nigeria Branch


supplier and manufacture chicken cage and poultry farm equipment (4)

Tanzania Branch


chicken cage design (1)

Ethiopia Branch


Reception /24 online WhatsApp NO. : +8613582487372

Email: managerwang@bestpoultryfarm.com